Out of stock

Kywoo 3D Printer Upgrade Dual Gear Extruder for Tycoon/ Tycoon Max/ Tycoon IDEX/ Tycoon Slim

Load image into Gallery viewer, Kywoo 3D Printer Upgrade Dual Gear Extruder for Tycoon/ Tycoon Max/ Tycoon IDEX/ Tycoon Slim

Kywoo 3D Printer Upgrade Dual Gear Extruder for Tycoon/ Tycoon Max/ Tycoon IDEX/ Tycoon Slim

Name: Kywoo 3D Printer Upgrade Dual Gear Extruder for Tycoon/ Tycoon Max/ Tycoon IDEX/ Tycoon Slim
Brand: Kywoo3d
SKU: 50040000010054
Price: 21.99 USD
Availability: OutOfStock

Brand: Kywoo3d

Product Code: 50040000010054

availability: Out of stock

$21.99

Note: this kit is suitable for Kywoo Tycoon series 3D printers. The motor is not included. Attention: If you want to install and use the dual gear extruder, you have to reflash the firmware to V2.1.3 and set the E steps from 93 to 127.4 in your settings. Pls...

Quantity must be 1 or more

Quantity:

Subtotal $21.99

Add to Wishlist

Subcribe to back in stock notification

Better printing with this dualgear extruder

The new dual gear extruder works very well. It makes it possible to convey the filament accurately even at slightly faster speeds.
Unfortunately the motor shaft is too short for the beautiful red threading wheel.
you have to get used to it.

dual guide extruder

The extruder worked correctly.

Doesn't work correctly

Unfortunately, after installing this extruder it just doesn't feed correctly.

The drive gear works just fine - but the secondary gear just clicks. It's like there's either too much friction for it to turn or the teeth are too far apart so it just won't push filament.

Oddly enough, the Load Filament function works correctly but when I try to print it just clicks and filament doesn't feed.

Happy about the dual gear extruder!

The normal extruder works mostly fine, but sometimes the dual gear extruder will make the difference. If your spool is poorly wound, it will make the little extra for a working/good print.
The mechanical structure is almost identical (except the additional gear) so it will cost extra 2 cents more (for the manufacturer) than the 'normal' extruder. Why will Kywoo did not use this extruder by default? I find it almost annoying to change the extruder for ~$15 because of this one simple gear.
But at least, I recommend the dual gear extruder, because of the little extra safety for your print.
BTW: Don't worry, after replacement there's no room on the axis for the red extruder wheel - I will not really miss it...

Service sucks

Came with no instructions on how to install it, nor how to configure the e-steps after the installation. Honestly would not recommend Kywoo products. Go with Creality or Prusia

Dear customer,
Thanks for your buying.
We are so sorry for this issue and thanks for your caution. We have already updated the links to the product details. You can check those links to learn how to install and change the Esteps. So sorry again for the inconvenience it brings to you. If you need any help, pls contact us freely and you can send email to this mailbox:service@kywoo3d.com
Pls don't worry, we are always here. We will get back to you soon after we see your emails, so no worry. Many thanks.
Best regards
Kywoo Service Team

1 2

Announcement

Note: this kit is suitable for Kywoo Tycoon series 3D printers. The motor is not included.

Attention: If you want to install and use the dual gear extruder, you have to reflash the firmware to V2.1.3 and set the E steps from 93 to 127.4 in your settings. Pls also remember to follow the datum line when you install it. Otherwise the extruder may couldn't work normally. (PS 1: The firmware of IDEX is V2.2, you can directly set Esteps to 127.4 and don't need to reflash the firmware. PS 2: Pls note that Mini couldn't use the dual gear extruder.) If you need the firmware V2.1.3, pls contact with service@kywoo3d.com and tell us which printer you have(Tycoon, Max or Slim), we will send the firmware to you asap. No worry.

Here is the link of how to install dual gear extruder: https://www.youtube.com/watch?v=5cC1tVqL8kY

Here is the link of how to change the Esteps: https://www.facebook.com/groups/kywoo3dofficial/permalink/935789320931165

Description

Introduction

1. Upgraded dual gears
High extrusion force, enhancing the feed strength, ensuring smooth feeding, better pressure pushes the filament into the printer, not easy to lose steps. Better print with TPU and other flexible filaments.
2. Strong Compatibility
Perfect replacement for Tycoon/ Tycoon Max/ Tycoon IDEX/ Tycoon Slim.
3. Stable & Durable
All-metal aluminum alloy, high-quality dual gear extrusion. Compared with the normal plastic drive, this high-quality aluminum metal dual gear extruder is more stable and durable.
4. High-quality Material
Adopts brand-new imported aviation aluminum material.
5. Easy to replace, you can simply install it by yourself.

Specifications

Material: Extrusion Clamp: Aluminum
Heat sink: Aluminum
Extrusion Gear: Stainless Steel

Extrusion Spring Specifications: ¢8×L21.5, wire diameter 1.1, compressed to 18.5mm; strength 27±0.5N

Packing List: Extrusion Clip*1, Heat Sink*1, Extrusion Gear*2, Extrusion Spring*1, Screw Set*1

Review Your Cart

Kywoo 3D Printer Upgrade Dual Gear Extruder for Tycoon/ Tycoon Max/ Tycoon IDEX/ Tycoon Slim

Subcribe to back in stock notification

Customer Reviews

Product details

Introduction

Specifications

Review Your Cart

Most popular

Kywoo 3D Printer Upgrade Dual Gear Extruder for Tycoon/ Tycoon Max/ Tycoon IDEX/ Tycoon Slim

Subcribe to back in stock notification

Customer Reviews

Product details

Introduction

Specifications

Your Cart

Video PopUp